REHABILITATION & MAINTENANCE OF BIOGAS PLANTS
To ensure a sufficient treatment process while at the same time increasing the biogas,
Conditions such as air tightness, suitable temperature, necessary nutrients, water contents, and maintaining suitable pH balance must be maintained.
OUR SERVICES INCLUDE;
- TRAINING ON FEEDING OF THE BIOGAS PLANT
Feeding the digester should be done regularly with the right material. If the plant is fixed to toilets, they should be under constant use to guarantee regular feeding to ensure continuous gas production.
- INCREASING THE MICRO-BACTERIAL ACTIVITY
The concentration of the anaerobic bacteria can be increased by adding our Enzyme and Bacteria into the plant. Cow dung has got methanogen bacteria which are of the same type as the ones contained in our enzyme and bacteria.
- SLURRY ANALYSIS
Slurry analysis should be done at least once a year and whenever the need arises especially when gas production has reduced.
- PH-TESTING
The pH of the slurry should be tested regularly and whenever the need arises especially when gas production has reduced.
- INSPECTION OF GAS PIPES
We check for leakages along the pipes and the accessories. Teflon tape must be used in pipe fittings to avoid leakage from pipe fittings.
- WATER TRAPS & MOISTURE CONTROL
We check and remove the accumulated water in the water traps. The water trap or water drain at the lowest part of the piping line should be checked regularly for its functionality. Water drain must be made at the lowest level of the fittings. Excess overflow of water in this device may increase the moisture content in the gas rendering it inflammable.
- REPLACE THE GAS VALVES AND TAPS ANYTIME THEY START TO LEAK
Biogas has a tendency to corrode GI pipe fittings. During piping, these components should be avoided but in case they are used, they should be replaced regularly in a span of two years.
- DE-SLUDGING OF DECOMPOSED WASTE FROM THE DIGESTER PLANT
This is the process of manual or mechanical removal of the settled decomposed waste at the bottom of the plant. During anaerobic decomposition, waste gases are produced and the remains settle down after some time. This continuous process accumulates some solids which affect the plant’s performance with time.
De-sludging therefore becomes necessary after 18 months depending on the type of waste digested. All the gas produced must first be released into the air or used up.
- CLEANING OF THE GADGETS CONNECTED TO BIOGAS
Biogas contains other gases such as Carbon dioxide and Sulphur dioxide as a result of decay. During combustion, these gases disintegrate producing other solid components such as Carbon and Sulphur oxides that are dissipated on the surfaces of the stoves, lamps, generators and all the equipment used.
This causes blockages when they have accumulated to a reasonable level. It is advisable to clean off all these particles for higher equipment efficiencies.
Related Products & Services :
Who We Are
We work to provide better products and solutions for our customers in their
homes, offices, restaurants, and industrial facilities around Kenya and Africa at large.
Our complete line of water solutions are trusted by many and …