REVERSE OSMOSIS WATER CHEMICALS
- Reverse Osmosis Membrane Scale Inhibitor / Antiscalant & Softener Resin Cleaner
Is a high-performance, reverse osmosis scale inhibitor scientifically formulated for the treatment and protection of reverse osmosis membranes. It can also be used as a highly efficient water softener resin cleaner and on-going preventative treatment for water softeners.
- Reverse Osmosis Membrane Antiscalant & Dispersant
Is a high performance non-hazardous reverse osmosis (RO) antiscalant and dispersant, scientifically formulated for the treatment and protection of reverse osmosis membranes under high silica feed water conditions.
- Broad Spectrum Micro-Biocide
Is a broad spectrum, non-foaming, readily biodegradable micro-biocide for use in industrial cooling water systems. It is based on a formulation of Isothiazoline derivatives and is completely soluble in water. At relatively low concentrations it is effective against a range of micro-organisms including many gram-positive and gram-negative bacteria, fungi and algae.
- Liquid Sulphite Treatment for Low-Pressure Boilers & Reverse Osmosis Systems
It’s easy to handle liquid sulphite solution that can be used as both a powerful oxygen scavenger for low and medium-pressure steam boilers and also a neutraliser for removing chlorine and other biocides to protect sensitive systems such as RO plants or prior to discharge to the environment.
- Sodium Bisulphite (40%)
Is a liquid neutraliser of halogens, particularly chlorine, and a wide range of other biocides. It can be used to neutralise excess chlorine following disinfection of water systems, including cooling water systems and the feed to Reverse Osmosis / RO systems. Can also be used to prepare waste streams for disposal to treatment services, including public utility services, by conditioning residual biocide.
- Reverse Osmosis & Ultrafiltration Membrane Cleaner
Is a high-performance membrane cleaner scientifically formulated for the cleaning of reverse osmosis (RO) membranes and ultrafiltration (UF) membranes.
During normal operation, reverse osmosis and other membranes can become fouled, which greatly reduces the efficiency of the system. Deposits build up on the membrane until they cause a reduction in normalised permeate flow, increases in differential pressure and losses in salt rejection.
The effects of fouling can lead to poor water quality, loss in production, unscheduled downtime and premature membrane replacement.
A regular maintenance and cleaning programme can provide a significant return on investment by extending system run time, preventing membrane degradation, maintaining lower feed pressures and extending the membrane’s life
- Reverse Osmosis Membrane Cleaner
A non-acidic chelant based cleaning agent for removing fouling caused by calcium, barium and strontium salts and iron oxides and hydroxides. It is particularly suitable for removing acid insoluble salts such as sulphates and fluorides. It can also be used effectively in combination with alkaline and biocidal cleaners to remove organic fouling and biofouling.
Membrane cleaning is recommended when any of the following fouling indications
are given:
- A 10-15% reduction in the normalised Permeate Flow
- A 10-15% increase in the normalised salt content of the permeate
- A 10-15% increase in the differential pressure across the membrane housing
- Reverse Osmosis Membrane Cleaner- Acidic
Is a mildly-acidic cleaning agent for removing fouling caused by iron salts, oxides and hydroxides. It can also be used to remove light calcium carbonate scaling.
Membrane cleaning is recommended when any of the following fouling indications
are given:
- A 10-15% reduction in the normalised Permeate Flow
- A 10-15% increase in the normalised salt content of the permeate
- A 10-15% increase in the differential pressure across the membrane housing
- Alkaline Reverse Osmosis Membrane Cleaner
An alkaline cleaning agent for removing fouling caused by organic, biological and colloidal foulants from RO and UF membranes. Membrane cleaning is recommended when any of the following fouling indications are given:
- A 10-15% reduction in the normalised Permeate Flow
- A 10-15% increase in the normalised salt content of the permeate
- A 10-15% increase in the differential pressure across the membrane housing
Related Products & Services:
Who We Are
We work to provide better products and solutions for our customers in their
homes, offices, restaurants, and industrial facilities around Kenya and Africa at large.
Our complete line of water solutions are trusted by many and …